DIY Fall Wine Bottle Decor – Perfect for any season!

image (95)

So before I get too ahead of myself with incessant posts about baby P’s first birthday and DIY Halloween decor I just wanted to share this little tid bit of my fall decor that I whipped up using things I always have on hand – wine bottles and scrap fabric 🙂 Now as I do on at least one day most weeks, I found myself in the fabric store buying the fall themed burlap for my DIY Autumn Pennant Banner and happened to walk past their display of little seasonal over-priced chochkies (is that how you spell that word? lol) and saw a cute little decorated wine bottle. As I do with most of the fabric store ready-made decor I passed since I was not about to pay $12.99 for a bottle (a small one at that, if it had actually contained wine at any point I feel bad for the person who emptied it – they got jipped! lol) wrapped in twine, however I did snap a picture and make a mental must-DIY-that note.

Before I get to the tutorial I think it’s worth mentioning that as I fulfill my holiday decorating goal of keeping my home decor themed with each holiday, I’m realizing the fact that Halloween falls right in the middle of the start of fall and Thanksgiving really messes with decor in that I came up with a whole bunch of autumn-y type ideas for our home only to remember that I would have to put up Halloween pieces and then pull the fall stuff out again for the whole harvest/autumn theme that goes along with Thanksgiving. Super complicated stuff this decorating business is, lol! Anyway, before I figured out that I would wind up in a decorating pickle, I decided to re-create the little wine bottle craft that I saw in the fabric store the week before only I would go a step further and create a set of four! Two things I love about this project: first, it is super easy and cheap to create and while I know wine isn’t free but lets be real, wine bottles are plentiful at the Schulze home, lol. Second, since there are four bottles and the embellishments are interchangeable I can easily swap out the wording for any holiday for instance, “noel” for Christmas, “love” for Valentine’s Day, “booo” for Halloween and so on. This can be made with any scrap fabric if you have a particular color scheme in mind or want it to fit the theme of a particular room instead of a holiday that would work too!

my inspiration!

my inspiration!

my version :)

my version 🙂

SUPPLIES

*this supply list is for my specific creation, any scrap fabric combinations can be used!

  • 4 wine bottles, labels removed
  • scrap burlap (plain and printed)
  • scrap lace
  • scrap fall print fabric
  • twine
  • gold ribbon
  • faux fall leaves
  • crafting letters or stencils
  • orange acrylic paint
  • hot glue/glue gun

DIRECTIONS

Step 1: I began by removing the labels from my wine bottles by soaking them in some warm soapy water then scrubbing off with a sponge. Since I drink relatively cheap wine the labels remove pretty easily but if yours are a little more stubborn Goo-Gone will take them right off.

image (89)

Step 2: I then cut my strips of plain burlap and lace and secured them around each of the wine bottles using a few dots of hot glue.

image (90)

my lace was actually cut from a pair of curtains that I found at a thrift store for $0.50!

my lace was actually cut from a pair of curtains that I found at a thrift store for $0.50!

image (92)

Step 3: Next I prepared my “fall” portion of the decor by cutting four small squares of fall themed fabric and then four smaller squares of printed burlap to be glued atop the first squares. Next took my faux fall leaves (purchased at Walmart for $0.98 for a package of about 12!) and used a dot of hot glue to attach two to each fabric square.

image (93)

98 cent Walmart leaves!

98 cent Walmart leaves!

Step 4: At this point I took my craft letters left over from another project and painted them orange (they were originally brown but I felt that the orange stuck out better, at this point you can also stencil the wording directly onto your fabric squares using acrylic paint). Once they had dried I glued each to the front of my fabric squares. To attach the square to the bottles I cut two small holes in the top of each of the fabric piece and ran a piece of twine through each and tied them around the body of the wine bottles. Finally I tied a decorative ribbon bow atop each of the bottle necks – done!

finished product :)

finished product 🙂

Skinny Italian Wedding Soup

photo (11)

Could it be!? After a brutal summer of 90+ temps daily, we are finally experiencing our first bits of fall here on the NC coast, woo-hoo! Yesterday was cool and rainy, just the kind of day that calls for a good bowl of soup. I am a huge soup fan and although the hot summer didn’t have me bringing out my soup pot very often, now that fall has arrived I will be on a mission to try out a new soup each week. This week I decided to come up with my own version of Italian Wedding Soup, which I’ve never really been a fan of because mystery meatballs out of a Progresso can kind of creep me out (lol) and the canned version is really the only version I’ve known of this soup until I spotted a Pinterest recipe for it that sparked my interest. While the recipe I found looked delicious I wanted to create my own lightened up version using lean turkey instead of sausage to form the little meatballs, both because J and I try our hardest to maintain a clean diet during the week and because now that baby P is pretty much eating what we eat I try to be more mindful of the sodium content and level of process to our foods. Another reason I love my new original recipe (and soups in general, for that matter) is that it is a great way to sneak in some leafy greens and veggies and lets be honest, who doesn’t love the clean-up (or lack-there-of) that comes along with a one pot meal!? Give this a try on your next rainy day or freeze up some mini-meatballs for a quick-fix meal down the road, either way – happy soup weather to you! 🙂

INGREDIENTS:

  • 1 lb. lean ground turkey
  • 1/3 cup bread crumbs
  • 2 cloves garlic, minced
  • 1 Tbsp. fresh Italian parsley, chopped
  • 1/4 cup parmeasan cheese
  • 1 large egg, beaten
  • 4 oz. frozen chopped spinach, prepared
  • 1/2 tsp. fennel seeds (optional, this will just give it a more “sausage-like” taste without using the sausage)
  • 1/8-1/4 tsp. red pepper flakes
  • salt and pepper to taste
  • 2 Tbsp. olive oil
  • 2 carrots, diced
  • 1 medium onion, diced
  • 8 cups chicken stock + 1 cup water
  • 1 cup dried orzo pasta
  • 1 can (15 oz.) cannellini or great white northern beans
  • 1 large bunch kale (or other dark leafy green, swiss chard would be great in this too!), stems removed and chopped (about 4 cups)

INSTRUCTIONS:

Step 1: Start by making your meatballs. Combine first 10 ingredients (turkey-salt and pepper) and mix by hand until just combined (don’t over mix!). Roll into small 1-inch meatballs (makes about 50!) and place on a tray or sheet pan and refrigerate until ready for use. SHORTCUT ALERT: You can prep these tiny meatballs ahead of time and freeze individually on a baking sheet lined with wax paper then transfer to a zip-lock bag once they are frozen and store for whenever you’d like to make this (or any!) soup!

Step 2: In a LARGE (emphasis on large because you will need it to fit 50 mini meatballs without overflowing, lol) dutch oven or pot, heat olive oil and add diced carrots and onion, season with salt and pepper and saute until just soft. Add the chicken stock and water to the pot and bring to a boil.

Step 3: Once soup is boiling add your mini meatballs one at a time, allow liquid to return to a boil the reduce to a simmer. Allow to simmer for about 5 minutes then add your orzo pasta to the pot. Cook until pasta is done (about 5-10 more minutes) and meatballs are cooked through, then check for seasoning and add your beans and chopped kale to the pot, cook for about 5 additional minutes until the kale has wilted. Serve with extra parmesan cheese and enjoy!

IMG_0192

I’ve finally been playing around with my new DSLR camera! Super excited to get more practice on yummy recipes 🙂

Football Themed Wreath – NY Giants

photo (4)

The past two nights have been all about wreaths! One of which was my “September” wreath which I decided to make football themed to both support our favorite team and because I felt weird putting out a fall themed wreath when it’s still too hot to go outside most days, lol. The other was a faux succulent wreath I made for our dear Aunt Maryann who patiently waited for it while my scatter-brained self took forever to get around to making it (and even longer to send it out, shame on me!) but I finally got them both done – yay! In this post I will be sharing my September football wreath which happened to be my first attempt at a mesh wreath. While we have been transplanted to the south we’re still NY fans to boot so since we don’t have cable at casa de Schulze (we pinch our pennies, remember? lol) this wreath will be our method of team support for the season. Aside from the fact that this wreath turned out HUGE (which I decided was fitting because “Giants” lol) I was very happy with the results and even happier with how easy it was to create! My only gripe with this wreath is that mesh is more expensive in comparison to burlap, however, I do like that mesh gives you the option for super bright fun colors which are great for holidays like Halloween and Christmas which is what will keep me coming back to this method. If you’re yet to jump on the deco mesh bandwagon give this method a shot, it’s just as easy as creating a burlap wreath and super fun!

Squishy baby wearing his Giants tie onsie! :)

Squishy baby wearing his Giants tie onsie! 🙂

 

SUPPLIES:

photo 1 (2)

  • Wire Wreath Frame – I used a 24″ frame because my craft store was out of 18″ frames but I would definitely suggest going with the 18″ or even a 12″ frame unless your door is exceptionally massive. The mesh adds a LOT of volume to the wreath so a small frame goes a long way!
  • Blue and Red 5″ X 45′ Rolls of Wired Deco Mesh – I used two of each, but if you were to use a smaller wreath frame you would definitely only need one of each.
  • Red and Blue Pipe Cleaners
  • NY Giants Scrap Fabric – left over from my DIY Little Man Tie Onsies
  • Mini Giants Football
  • 2 Mini Giants Helmets
  • Blue 1/4″ ribbon
  • Scrap Burlap Fabric – left over from my DIY Rustic Burlap Pennant Banners
  • Stick-On Fabric Letters
  • Glue Gun & Hot Glue

WHAT I DID:

Step 1: I began by cutting the pipe cleaners into thirds to shorten them, then twisting the shorter pieces around the wreath frame wherever I was planning to bunch up the mesh. Then I used basically the same method I used to create my 4th of July Burlap Wreath, by weaving the mesh in and out of the wire frame (in an over-under-over-under manner) using the pipe cleaners to secure the mesh to keep it “poufed” up. NOTE: Another method would be to use a styrofoam wreath frame (as I did to create my Chevron Wreath) and create loops out of the mesh by stapling them directly to the styrofoam frame to achieve the same look.

photo 2 photo 3

Step 2: After I had finished creating the mesh portion of the wreath I attached my embellishments. I cut a small hole in the back of the mini football and threaded a pipe cleaner through the whole and attached it to the wire frame. I did the same with the mini footballs which already had holes in the sides that were perfect for threading the pipe cleaners through.

Step 3: I then moved on to my mini “Go Giants” pennant banner which I created by cutting mini triangles out of my scrap burlap and then smaller triangles out of my scrap Giants fabric to fit atop the burlap triangles which I attached using hot glue. After I had created all of my little triangles I went ahead and attached my fabric letters which were actually stick-on but I used a bit of hot glue on the backs of the letters as well to ensure that they really stuck since my wreath was going to have to brave the elements. After adding the letters I created the pennant banners by gluing the triangles to my blue 1/4″ ribbon, one reading “go” and the other “giants”. I secured it to the wreath by tying each opposing end to the wire frame.

Step 4: My final step was not planned but after finishing my wreath the episode of SVU I was watching still had a few minutes left (lol) so I took that time to play around with the idea of adding the Giants logo and helmet to the mesh. I cut the logos and helmets out of my fabric and used hot glue to secure the fabric to the top of the mesh and another piece of scrap fabric to hold it in place on back (inside of the mesh) since the hot glue would not fully secure the logo/helmet to the mesh without a backing.

photo 4

please disregard my disgusting doormat! hehe This is the GIANT wreath in all it’s glory, you can see it from space! ha

TA-DA that was it! Now that I’ve attempted this method I will most likely be making another deco mesh wreath for my Halloween/October wreath (except I will use the appropriate wreath frame this time, haha).

 

DIY Painted Plastic Planters

pot

When we moved into our house on base I was pretty set on not doing anything to spruce up the landscaping. After all we are technically renting this house, so what bigger waste of money than to landscape somebody else’s property? Well after about one week of staring at the ugly, weed infested pine straw “garden bed” that lies around the front of the house, my will to want my home (renting or not) to look it’s best got the better of me and I decided we needed to do something to spruce it up even if it was just changing out the pine straw for mulch.

In my landscaping-on-a-budget post I discussed how we went about sprucing up our Honey Tree home with basically empty pockets, so we decided to apply the same principals here to make our new happy little home look a little more happy on the outside. I will most likely be posting about our new little landscaping project in detail but for now I wanted to share my little pièce de résistance of my outdoor decor – my painted plastic planters! These were inspired by a pair of painted terracotta pots I found on Pinterest (see picture below) and had the terracotta pots at Lowes been on sale I probably would have duplicated the project exactly, but at clearance prices of $2.99 and $1.49 and I couldn’t resist purchasing the large plastic containers that I ended up using instead. Another reason this project had me so giddy, is that since I already had spray paint on hand all that I needed besides the pots were a few plants and of course I chose perennials so that I could enjoy my little plastic wonder pots year round 🙂 This project can absolutely be done using any kind of planter, or better yet planters that are already black in color, I just chose to go with clearance items since the black ones were full price. You can even save yourself the trouble of using a store-bought stencil by checking out my hand painted sign tutorial and using the same technique for creating a stencil using painter’s tape. Hope this inspires you to do some fall landscaping while everything is going on sale! 🙂

My Pinterest inspiration!

My Pinterest inspiration!

My version :)

My version 🙂

DIY PAINTED PLASTIC PLANTERS

WHAT I USED:

  • 2 plastic planters – 1 medium, 1 large. I purchased mine on clearance at Lowes for less than $3.00 each!
  • Black matte finish spray paint – make sure it says that it is suitable for plastic and the outdoors, something like this would be good.
  • Clear matte finish spray paint/enamel – something like this would be fine.
  • White paint – I used white latex paint that I had left over from another project.
  • Stencils – I purchased mine at Staples. If you do not want to use stencils check out my Hand Painted Sign Tutorial for an alternative stenciling method using painter’s tape.
  • Painter’s tape
  • Small paint brush

WHAT I DID:

Step 1: I began with these two medium and large sized plastic planters, in grey and blue (because that’s what they had on clearance). Since I wanted them to be black I hit them both with an even coat of flat black outdoor/plastic grade spray paint. The recommended dry time was about 15 minutes so I waited about an hour before moving on to the next step due to humidity.

pot3

I didn't bother painting the insides since the dirt would cover the interior.

I didn’t bother painting the insides since the dirt would cover the interior.

Step 2: Once my pots had dried, I secured my store bought reusable stencils (the same ones I used for my DIY Rustic Burlap Pennant Banners) to the pots using painter’s tape and used a paint brush to paint the “NO. 3347” using white latex paint. White acrylic paint will do as well, since you will be sealing it against the elements using a clear enamel it doesn’t matter whether or not the white paint is suitable for the outdoors.  FYI, this is not an exact science, once I removed the stencils I returned and added another coat of paint and touched up any areas where the paint had leaked under the stencil. If you do not want to be troubled with this check out the above mentioned tutorial on hand painted signs for the painter’s tape method. You can also use white spray paint for the letters and stencils but I do not recommend it, it is super messy and will not be as tidy looking.

Step 3: Once your wording/numbers have dried, hit that area of your pot with a few coats of clear spray paint/enamel. This will keep your letters safe from the elements no matter what type of paint is underneath. That’s all folks! I waited until the next day to pot my plants to ensure that the enamel and spray paint had fully dried.

Finished product!

Finished product!

My goal in creating this little potted display was to cutsie up my stoop using a barely-existent outdoor decor budget. This would undoubtedly work better using ceramic pots since the paint would be less likely to peel or chip, however, the benefit to mine aside from the extremely low cost is that I don’t need to worry about these cracking come winter (which will be here before we know it, eek!). There are so many variations on this so go nuts! 🙂

For the plants I kept it simple with a small evergreen tree and three small lirope plants. The two mums alongside are potted in $1.98 Walmart pots.

For the plants I kept it simple with a small evergreen tree and three small lirope plants. The two mums alongside are potted in $1.98 Walmart pots.