After posting about my DIY Valentine’s Day Wreath I felt super proud to have gotten a post up that actually preceded the holiday for which I created it, haha. So in keeping with that rhythm I’d like to share one more Valentine’s Day DIY project that I had made mention of in my wreath post – my DIY oversized Valentine’s Day “XOXO” sign, perfect to lean on your front porch and cause your neighbors to do a double take when driving by :). This project was actually inspired by DIY Oversized Holiday Sign that I displayed throughout the holidays (I will do a separate post about that soon along with the rest of my DIY Christmas décor). As I was reluctantly stripping my stoop of all of it’s holiday awesomeness I realized that since my “NOEL” sign was so easy to create (less than $9!) I could just create a similar one for Valentine’s Day! Before I get to the tutorial I am going to admit a serious “mom-brain” moment and let you know that you can actually make two of these signs for the price of one by simply making your sign reversible, something I myself didn’t realize until my friend commented on my picture and said “I would love to have one of those with something for Christmas on one side and Valentine’s Day on the other” – DUH, Natasha! So had my brain actually been functioning on the day I created this I would have simply turned my “NOEL” sign over and painted the “XOXO” on the back. However, no harm done as I can just do my St. Patty’s day sign on the back of my Valentine’s Day one, that’s right, I love this project so much that I’m pretty sure I’ll be making one for each and every holiday! Hope this inspires you to create a simple project that makes a BIG statement :).
For my throwback-Thursday I’ll share this adorable Valentine’s Day picture of my little Baby P, at the time just four months old, my how time flies! Click on this picture for the link to my post about all of my little DIY Holiday Photos, if you love squishy babies you’re in for a treat! 🙂
SUPPLIES
- 1 4ft X 1 ft board – the cheap “white board” stuff is fine, that’s how I got away with this being a $9 project, since these boards already come in this size there is no need to have it cut (although if you’d like it smaller go ahead and have them cut it down to size for you right there in the store). I purchased my board at Lowes for $8.97 less my military discount. Try to pick a piece that doesn’t have any large cracks as some of them do.
- latex paint – any color you wish! For the background of my board I used “March Breeze” (aka white lol) and for the letters I used “Front Door Red” and “Dusty Garnet” all by Valspar. These colors I already had on hand since I tend to collect those little sample sized paints available at Lowes, please check out this post to read more about those.
- black foam brushes
- electric sander or sanding blocks – for distressing, if you do not plan to distress and your board is in pretty good shape you could probably do without these.
- painter’s tape (preferably wide)
- x-acto knife
- printer
- Minwax Finishing Paste – any topcoat will do, I used this paste wax because I already had it on hand and it doesn’t require extensive dry time. I used “special dark” to give the sign a more vintage/rustic look.
INSTRUCTIONS
Step 1: Begin by sanding down your board lightly just to soften up any rough or little jagged areas. Next paint your board whatever background color you have chosen. Since I was going for a distressed/white-washed look I only did one thin coat but you can do as many as you want. NOTE: Since my sign wasn’t reversible this time I did not bother to paint the back if you are planning to do a second holiday or saying on the back you can save time by painting the back now, once your front has dried.
Step 2: Next I distressed my board on the edges and a little along the front using my electric sander. This could also be done by hand using sanding blocks or regular sand paper.
Step 3: Using whatever word processor you have at your disposal, create your words. Sometimes I find it is easiest to get the biggest letters by Googling, for example, “letter X” and then copying and pasting the stock image onto your blank document, this way you can maximize your margins and adjust the picture of the letter to be as big as possible, whereas when simply typing the letter x you may not get it to be as big. Make sense? The hearts I just created using the “insert shape” function on your word toolbar, and inserting them right into the middle of the O. Once you are happy with the size of your letters just print out your document. NOTE: this probably goes without saying but if you’re anything like me your brain is occasionally scooped out and the obvious may be temporarily lost on you, but since “XOXO” contains two of each character you need only create one X and one O document and print each twice. This is great because you can be sure that they’re even!
Since I didn’t take step-by-step photos of the “XOXO” board here is one from this step when creating my “NOEL” board at Christmas time.
Step 4: Now cover your board with painter’s tape (this is where it helps to have the wide painter’s tape). Next, arrange your letters on your board, if you’re super OCD you can use a measuring tape or ruler (even a level if you’re super nutty) or you can just wing it and place the letters so that they look even to you and use a bit of tape to hold them in place. Then using your x-acto knife carefully (no craft-induced ER trips please lol) cut around your letters and hearts pressing firmly enough to cut through both the paper and tape, once you have finished (or as you go along, whatever works for you) peel off the letters and you will be left with a stencil of your letters and hearts (Os should be filled in with the exception of the heart portion). *For more on this method check out my post on my first DIY Hand-Painted Sign.
Step 5: Once your little makeshift stencil is ready to go you can now paint! Using your foam brush apply an even coat of paint to each letter in the colors of your choosing. Allow about half an hour in between coats, juts enough for any wet areas to dry. Since your background is white you should not need more than 2-3 coats. NOTE: If you’re painting a light color over a dark background I would suggest hitting your letters with a coat of cover stain/bonding primer in either brush or spray form (see this link for a product recommendation) then applying your color on top, I will touch more on this when I post about my DIY Oversized Holiday Sign).
Step 6: Allow your piece to dry about 8 hours or overnight. Once it is dry peel off the rest of your painters tape to reveal your beautiful hand-painted letters! At this point you may want to give the letter a very light sanding just to remove any thick areas where the paint may have built up between the tape and the edge of the letters but if you’re happy with how it looks you can just move onto the final step – waxing your piece.
just before the waxing step!
Step 7: Using a lint free cloth or rag apply a thin layer of your paste wax and allow to sit for the recommended amount of time (15 mins I think?) then return with a clean rag and buff your piece. If you are using a liquid or spray topcoat just follow the directions on the package and wait the appropriate amount of times between coats and be sure to allow enough dry-time before displaying your piece out doors. Personally I am partial to the wax (a) because I already had it on hand and (b) once you buff it, it is ready for display, no dry time!
Squishy baby photo-bombing my Valentine’s Day stoop photo 🙂
Like my wreath? Check out this post to find out how you can easily make one yourself!
simplyschulze 