Monthly Archives: February 2016

Skinny Berry Sangria

Posted on by

0

IMG_0606

This is a GREAT drink! So good in fact, that I had to wait for the after effects (and the memory of the after effects, lol) to wear off enough for me to stomach writing up the recipe for you guys, haha. The good news is as long as you don’t let these go down like water (as we did on our girl’s night) they shouldn’t give you any trouble but I will warn you it’s difficult because MAN are they delicious! This drink was my effort to create a fruity and fun “girl’s night” cocktail while keeping the calories at bay (the sugar content is still a factor but at least it’s from fruit and fruit juice, we do what we can right? haha). I love getting together with my girls for drinks but especially during the winter those extra calories hiding in your cocktails can definitely do some damage to the waistline. While it’s no secret that the best way to keep healthy and fit is to eliminate alcohol altogether, you’ll feel a little bit better about your decision to have a drink or two knowing that you were able to lighten them up even just a little bit! This is a great big-batch drink to make for a crowd and would be super fun for a bridal shower or summer event. That being said, cheers to warmer weather hopefully being on the horizon for us NOVA folks (but if not I can always warm up with this cocktail).

IMG_0596

Like my champagne glasses? They’re available here on Amazon in sets of four (“toast”, “sparkle”, “cheers” and “celebrate”) – so cute!

INGREDIENTS

IMG_0593

  • 1 bottle Sparkling Brut Rose (if you prefer a sweeter drink try a sparkling moscato or regular sparkling rose but I felt plenty of sweetness came from the fruit and cranberry juice)
  • 1/2-1 cup Berry Vodka (depending on how strong you want your sangria)
  • 1 cup berry or raspberry seltzer
  • 2 cups light or diet cran-raspberry juice
  • 1/2 cup each strawberries (sliced), raspberries and blueberries
  • frozen mixed berries for serving (optional)

INSTRUCTIONS

  1. Combine the fresh berries, vodka and cran-raspberry juice in a pitcher and allow to refrigerate for at least an hour.
  2. When ready to serve pour in seltzer and brut rose and stir. I served mine in champagne glasses with frozen mixed berries in lieu of ice cubes!

Simple Valentine’s Day Wreath

Posted on by

0

IMG_0039

Another holiday is right around the corner and depending on your personality (or relationship status, ha) you either love or hate this one – love everywhere, prepping for a fun night out (or in, in my case), flowers, the color PINK, tiny candy hearts … as you may have guessed I’m in the “love it” camp on this one … Valentine’s Day!!! I’m a sucker for really any holiday and no, we shouldn’t need a special day to shower the one we love with affection and goodies but isn’t it so fun nonetheless? Mine and J’s personal couple tradition since before we were even married has been to dress up and have a fancy dinner at home (this year’s meal includes a special shrimp appetizer that is a Schulze original and as long as it isn’t a total bust I plan on sharing it on the blog next week!). We prefer sharing a few cocktails in the relaxed environment of our own home, cooking a super fancy meal together  and really enjoying each other’s company as opposed to spending our Valentine’s Day in a crowded restaurant. It’s the simple things, right? Which brings me to this wreath – a super simple way to have an eye-catching door all month long!

182734_10150413236975486_818742_n

A few years (and a few pounds *sigh* lol) ago in our old place having our traditional “fancy” night in.

I was originally inspired by a wreath I came across on Pinterest (pictured below). Since the only necessary components seemed to be a grape vine wreath, a wooden letter and an assortment of ribbon, this seemed to be an easy fix for my Valentine’s Day door! I have been super into grapevine wreaths lately and have quite a few posts about them on the backburner (here is a fun springtime wreath using a grapevine frame) but for now I will say that I love them for a few reasons but mostly because they’re super cheap (you can get one for under $5.00, however, I  always use a coupon so it will come in around $2.50 or so) and they are super easy to work with; the tightly wound vines allow things to be stuck into them easily and pretty much any adhesive bonds well with them so it is easy to adhere embellishments as well. This wreath is very reminiscent of my St. Patty’s Day Rag Wreath which utilized mostly left over crafting supplies to create and I applied that same idea here as most of my ribbon I had on hand or was able to find half off at Hobby Lobby. This is a great beginner’s wreath as it doesn’t require any particular skill so if you can tie a knot you can do it, I promise, lol! Check out the tutorial below and if you’re feeling adventurous hop on over to my other Valentine’s Day posts (an Oversized Porch Sign and another Valentine’s Day Wreath) for some more crafting inspiration in this month of love xoxo.

12741884_10156521467810486_1622838805484619586_n

Happy Valentine’s Day from the Schulzes to you!!!

 

 

7d4e043a9926a96046b45fe84e816c05

My “pinspiration” – follow the link to find this particular wreath for sale here on Etsy – http://www.etsy.com/listing/175318886

 

IMG_0316

My version!

SUPPLIES

  • 12″ grapevine wreath – available at any craft store or where crafting supplies are sold.
  • assortment of wired ribbon of varying sizes – it isn’t 100% necessary to use wired ribbon but the ribbon will look more poofy and have a bit more structure and ability to stand up to the elements this way. The amount of ribbon is totally up to you, I think I used about six.
  • wooden letter – I chose to paint mine white and then add some hearts using this method. You can always just draw hearts or polka dots using an oil based Sharpie paint pen as well.
  • paint (for wooden letter, optional) –  latex, spray paint, acrylic really anything will do. I chose to spray paint mine because I already had some on hand and it’s probably the easiest method.

INSTRUCTIONS

  1. If you plan to paint your wooden letter, do this first. With any luck it will be dry by the time you finish the rest of the wreath.
  2. Begin by cutting your ribbon into about 3-4 inch strips. Some can be longer or shorter and in fact it’s more fun if they are not all the same size so that it creates a less uniform look.
  3. Next, begin tying your ribbons randomly onto different areas of the half of the wreath you’ve chosen to decorate. Simply loop the ribbon under one of the vines and then tie – that’s it! Repeat in this fashion until you’ve achieved a dense look with little to no wreath base showing through.
  4. To attach your wooden letter either tie it on using ribbon or if you have access to a staple gun (which is what I did) staple a pipe cleaner or other wire to the back of the letter and tie it onto the wreath in this manner.
  5. At this point feel free to add any additional embellishments (like my little glittery Styrofoam hearts) – the dollar store is a great resource for little things like this!

That’s it! If you’re like me and measure units of time in “naptimes” then this should only take you about 3/4 of a naptime lol. 

vdaywreath2

Last year’s Valentine’s Day porch!

Coastal Chic Side Table Re-do – Blizzard Project #2

Posted on by

1

IMG_0556

Okay well I might be exaggerating about the “blizzard” part of this project a bit. The snow left just about as quickly as it came so “post-blizzard” project would probably be a more appropriate title :-p. However, since I had every intention of finishing this one up just as quickly as my first two-tone side table (an actual blizzard project that you can check out via the previous link), in the interest of not taking away from my sense of accomplishment I will still group it in with my other blizzard-inspired creations ;-).

Before pictures – this old girl definitely needed some help!

I had mentioned in my previous post that I’m constantly browsing the local online yard sale sites in hopes of coming across some perfectly-priced furniture treasures in need of a face lift. I’m so thankful for this method of seeking out pieces to re-do because while P is quite the well behaved little boy, thrift store hopping with a toddler in tow can present a wide array of challenges, haha. Additionally, cruising the online buy/sell/trade pieces has also helped me find some great furniture re-sale and consignment stores I might not have easily found otherwise and that is exactly how I came across this particular piece. Through her posts on our local area B/S/T page I was able to become connected with the home-based business Willow Tree Restorations (I have linked her Facebook business page just in case you are checking in from the NOVA area or simply want some inspiration, her work is fantastic!) where the owner, a woman after my own heart, finds and refinishes beautiful vintage pieces. While I love her refinished pieces oh-so much I especially love that most of the pieces she finds she will also offer up as-is so that DIY enthusiasts such as myself can try their handy work at making them their own.

How cute is sweet P helping to sand?! My little DIY-er in training. NOTE: I know a lot of people don’t bother sanding when using chalk paint but I always just give it a quick run over by hand with a sanding block or with the small electric sander on the larger surface areas of a piece.

As for the re-furb story behind this particular piece, I have been obsessing over the two-tone look lately (I’ve posted a few of my inspirational pieces below) and after my success with the last piece I knew I wanted to try it out with some color, especially because I knew that I didn’t have a place for this particular piece in my home and would probably be re-homing it, I could really get creative with a color scheme other than what I’ve been working with. While the beachy and “coastal-chic” color pallets have never had a place in my personal décor I’m loving blues, whites and aquas more and more as of late! The particular colors I mixed for this particular project (see this post for information on how I mix my own chalk paint) are “Patina Blue” by Valspar and “Antique White” by Valspar (a great white somewhere between true white and ivory that I use for a lot of projects). I mentioned in my previous post that I’ve been trying out some new products in an effort to go a natural route with my top coats and waxes as opposed to harsher products like Minwax so for this particular project I tried out Chalk Mountain Wax available on Amazon – I was very happy with how great the wax turned out and the pack of two waxes also come with a wax brush all for under $30.00 so definitely great value there. After lightly distressing the edges of the table I waxed the entire piece first with the clear wax followed by a single light coat of the dark, just to add some warmth. In the interest of giving the piece a complete facelift I picked up some new pulls from Hobby Lobby while they were 50% off (normally $4.99 each), I love how new pulls or knobs can really transform a piece and you definitely see that in the before and afters here, I suppose it was unnecessary but I can always reuse the original pulls on another piece in the future!

My little apprentice in action again! lol Thankfully I switched to that all natural wax. This little munch came right over and took the brush out of my hand and said “I’ll do it! I’ll do it!”.

IMG_0555

Wow – that was a long post for such a little side table, lol. I hope it inspires a little coastal-chic project of your own … or maybe even inspires a trip somewhere warm (can you tell I’m longing for summer over here? haha). Speaking of inspiration, two of the pictures below are linked to the online shops of friends of mine, so please check out and “like” their pages – they are super talented and even if you are not local to their areas to shop with them they are certainly a wealth of inspiration!

Here are a few pieces that inspired this project. Secretary desk: Shabby Chic Boutique Desk: The Handcrafted Life Dresser (found via Pinterest): Homeroad